SCL 1207 Progress Report

SCL 1207 seen in May 1968 is trailing SCL 1202 in southern Georgia. The split image scheme of Seaboard Coast Line is one of the most attractive schemes which combines the predecessor paint of Seaboard Air Line and an emergent SCL image.

 

I have chosen to model SCL 1207 in the standard freight scheme using the Rapido RS11. The model was disassembled completely to remove and change the necessary details. In the photos above, you can see the results of the grab irons being removed, the cab glass being removed, and the lettering removed. 

Using a soaked portion of paper towel, I overlaid the paper towel atop the lettering and using Walthers Solvaset decal setting solution, I removed the lettering from both sides of the cab, and one side of the long hood without incident. The side seen above, was a completely different experience. The chemical solutions were varied to include Microscale Microset and Champ decal setting solution which removed the "S", leaving behind, "EABOARD" untouched. I decided to manually remove the lettering using a Paasche air eraser which eliminated the lettering, but marred the remaining paint.

I thoroughly cleaned the model and decided to create a mixture which would closely match the existing paint using Tamiya acrylics. The mixture was begun with Tamiya XF-62 Olive Drab, and darkened using Tamiya XF-9, Hull Red. The paint was darkened sufficiently and I then added three drops of Tamiya XF-3 Flat Yellow. The paint was thinned 3:1 using Tamiya Lacquer Thinner and stirred until all colors were blended. The paint was airbrushed onto the model using 25 PSI and allowed to dry for approximately 30 minutes. The paint obliterated the damaged paint and provided a good base which to my surprise matched exceptionally well. 

The above image of the long hood was the side which did not require any touch-up and the long hood, cab, and short hood were oversprayed using a 6:1 mixture of Glosscote to Lacquer Thinner. After multiple light coats, the model is now ready for decals which will be sourced from Microscale SCL Split Image set 87-1238.